#Bullet vibe batteries how to#

Different batteries can provide different milliamp currents. We recommend using regular power batteries. Taking them out when not in use when you travel is recommended. Cheap batteries will not give you power, the power drains quickly and will not last very long, and nothing is worse than running out of control at a critical moment.ĭon’t mix new batteries with old ones. It is recommended that you use a powerful battery from a well-known brand. Replace the battery immediately if you find any signs of acid leakage, corrosion, or disconnected wiring. Most vibrators that use two batteries side by side will require the batteries to be inserted in opposite directions, one facing down and one facing up, rather than in the exact directions. Some of our vibrator products have small plus and minus symbols on the battery compartment to tell you where to insert the batteries. If you buy a dry vibrator without batteries, you need to buy your batteries. Check the Batteryīe sure that the batteries are placed in the correct position, that the positive and negative poles are not wrong, and that the battery type is not wrong. We always suggest you familiarize yourself with the control before using it, don’t confuse the user with the rest of the vibrator. Usually, people hold the control button too long or not long enough, some need to be pressed quickly, and some need to be pressed shortly for a few seconds. The Switch is Not Pressed Long Enough / Pressed Too Long Make sure you have assembled the vibrator correctly and that each device is ideally in the position it should be in.

#Bullet vibe batteries how to#

The Switch is Not Pressed Long Enough / Pressed Too LongĮspecially if you have just purchased a new vibrator when you first buy it, you may need to charge it before you can use it properly, so don’t rush to use it.Įach vibrator has a different assembly method, with other forms of use, such as how to use the switch, the battery insertion method, etc.